Vol. 19 No. 2 (2020), Studies and researches

Vol. 19 No. 2 (2020)

SOLUTIONS FOR REDUCING THE WAITING TIME IN A PRODUCTION FLOW

Studies and researches

https://doi.org/10.71235/rmee.166

Published 2020-09-30

Șef lucr.ing., dr.ec. Ancuța BĂLTEANU⁺⁻
Șef lucr.dr.ing. Monica BÂLDEA⁺⁻

Șef lucr.ing., dr.ec. Ancuța BĂLTEANU

-

Șef lucr.dr.ing. Monica BÂLDEA

Universitatea din Pitești

PDF

Keywords

production flow
waiting time
cutting operation
countermeasures
action plan

How to Cite

BĂLTEANU, Șef lucr.ing., dr.ec. A., & BÂLDEA, Șef lucr.dr.ing. M. (2020). SOLUTIONS FOR REDUCING THE WAITING TIME IN A PRODUCTION FLOW. Review of Management and Economic Engineering, 19(2), 279. https://doi.org/10.71235/rmee.166

Abstract

The present paper presents a study carried out in a production company. One of the problems of production is due to the existence of a long waiting time between the various operations. In this respect, the cause of the problem was identified, and subsequently solutions were proposed for its solution. Finally, due to the implementation of identified countermeasures, the waiting time was significantly reduced.

https://doi.org/10.71235/rmee.166

PDF

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Similar Articles

Alina DANCIU, Paul MEDAN, Simona VLAD, Nicolae CRISAN, OPERATING-ROOM TIME MANAGEMENT DURING ROBOTIC-ASSISTED SURGERIES - CASE STUDY , Review of Management and Economic Engineering: Vol. 23 No. 1 (2024)
Izabella Eva GHERMAN, Florin LUNGU, Ioan Simion DAN, CHARTING THE PRINCIPLES OF THE CIRCULAR ECONOMY IN THE EVOLUTION OF CUSTOM PRODUCTION MANAGEMENT , Review of Management and Economic Engineering: Vol. 23 No. 1 (2024)
Grațiela Dana BOCA, Francesco GENOVESE, TOOLS USED TO IMPROVE QUALITY MANAGEMENT , Review of Management and Economic Engineering: Vol. 20 No. 4 (2021)
Florin LUNGU, Mircea TEODORESCU, Oana Eleonora GLOGOVETAN, THEORETICAL ASPECTS REGARDING ARTIFICIAL INTELLIGENCE ALGORITHMS USED IN SERIAL PRODUCTION PROGRAMMING , Review of Management and Economic Engineering: Vol. 20 No. 4 (2021)
Ancuţa Mihaela BĂLTEANU, Cezarina Adina TOFAN, STUDY ON YIELD PERFORMANCE ANALYSIS WITHIN A PRODUCTION LINE , Review of Management and Economic Engineering: Vol. 21 No. 1 (2022)
Cezarina Adina TOFAN, Ancuţa Mihaela BĂLTEANU, STUDY ON THE APPLICATION OF KANBAN METHODS IN A PRODUCTION FLOW , Review of Management and Economic Engineering: Vol. 21 No. 3 (2022)
Alice GAMA, Diana MARCOV, Nicoleta PAU, Andreea PIETRARU, Ioana VALEA, Andra DIACONESCU, Delia ROZOVLEAN, STUDY ON EMOTIONAL INTELLIGENCE IN THE WORKPLACE: FINDINGS FROM A CASE STUDY IN AUTOMOTIVE INDUSTRY , Review of Management and Economic Engineering: Vol. 22 No. 3 (2023)
Șef lucr.dr.ing. Monica BÂLDEA, Șef lucr.ing.,dr.ec. Ancuța BĂLTEANU , APPLICATION OF THE METHOD AMDEC IN A PRODUCTION FLOW , Review of Management and Economic Engineering: Vol. 19 No. 1 (2020)
Geanina-Ioana BOGLUȚ, Grațian-DANIEL GOLOȘIE, Neta-Ionelia ȘAPTEBANI, Mihai ARDELEAN, Timeea IACAB, COMPARATIVE ANALYSIS OF FREIGHT TRANSPORT SYSTEMS IN ROMANIA: INFRASTRUCTURE AND TRANSPORTED VOLUMES , Review of Management and Economic Engineering: Vol. 23 No. 2 (2024)
Oana Ofelia BERTEA, Alexandra-Maria COROIAN, Andrei Alexandru LĂCRARU, Izabela POPESCU, Larisa IVAȘCU, STRATEGIC MANAGEMENT IN SMALL BUSINESSES DURING COVID-19 , Review of Management and Economic Engineering: Vol. 20 No. 3 (2021)

1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

Șef lucr.dr.ing. Monica BÂLDEA, Șef lucr.ing.,dr.ec. Ancuța BĂLTEANU , APPLICATION OF THE METHOD AMDEC IN A PRODUCTION FLOW , Review of Management and Economic Engineering: Vol. 19 No. 1 (2020)